Antidetonation additive ASX-G
-in terms of antidetonation effectiveness, it surpasses N–Methylaniline (NMA) by 70 times, MTBE - by 700 times;
- is non-toxic, has low volatility;
-stable when stored in air and light, does not require special storage and application conditions;
-insoluble in water, which eliminates contamination of groundwater in the event of an additive leak from a damaged container.
- is non-toxic, has low volatility;
-stable when stored in air and light, does not require special storage and application conditions;
-insoluble in water, which eliminates contamination of groundwater in the event of an additive leak from a damaged container.
ANTI-DETONATION ADDITIVE ASX-G
Product name
Anti-detonation additive ASX-G.
Product definition
Stabilized antioxidant with aromatic hydrocarbons.
Chemical formula
The product is mixture, chemical formula isn’t determined. Aggregate state – liquid.
Usage
Anti-detonation fuel additive.
Application
Complex anti-detonation additive that provides high performance increase of octane rating in a typical oil gasoline and also in the alternative motor fuels based on the bioethanol.
At low concentrations, it provides fuel producers with high flexibility in adjusting the octane values in accordance with standards and reduces the economic costs of production.
It can also be used as an auxiliary anti-knock additive.
COMPOSITION, INFORMATION ON INGREDIENTS
Anti-detonation additive ASX-G ® produces by compounding of petrochemical synthesis products. Classification of components according to the rules (ЕU)
№1272/2008 (CLP):
№1272/2008 (CLP):
PHYSICOCHEMICAL PROPERTIES
State of aggregation:
Liquid
Color:
From yellow to dark-yellow or dark red
Density at 20C:
0,870 – 1,070 kg/m3
Freeze point:
-108.6 °C
Flashpoint:
28°C
Boiling temperature:
55.3 °C
Solubility in water:
Insoluble
Well soluble :
Hydrocarbons (oil, gas, gas condensate, gasoline, kerosene (PT, TS), diesel, industrial oils), hydrohydrocarbons solvents and alcohols.
Stability under storage:
Stand
Recommended standard of applying
The recommended input rate is from 0.01 to 0.02% by weight. The effective input rate can be determined by our specialists after considering the characteristics of the fuel.
Recommended method of applying
ASX-G is dosed into fuel both as a concentrate and as a solution with base fuel. The input is carried out by standard pumping equipment in the fluid flow, liquid mixing plants that are used at oil refineries or oil depots, as well as special dosing devices for additives and additives of both periodic and permanent action.
TEST RESULTS ON OIL REFINERIES
UKR TAT NAFTA (Ukraine)
starting RON 90.6
+1,7 octane rating increase
+1,8 octane rating increase
starting RON 90.6
+1,7 octane rating increase
+1,8 octane rating increase
NAFTOGAZ (Ukraine)
Decrease in the use of MTBE by 30%
Decrease in the use of MTBE by 30%
Iraq
starting RON 82
+ 12.2 (combined use with MMA and MTBE)
starting RON 82
+ 12.2 (combined use with MMA and MTBE)
JSC “NefteKhimService” (Russia)
starting RON 93
+ 3,2 octane rating increase
(combined use with aniline)
starting RON 93
+ 3,2 octane rating increase
(combined use with aniline)
Contact us:
info@grenu.org
+447848876977
GRENU LTD
Reg. number 14229136
34 Poplar Way,
Leamington Spa,
CV31 2SQ,
England
Reg. number 14229136
34 Poplar Way,
Leamington Spa,
CV31 2SQ,
England
